Despite its size, the Condor CTA-104-I is mounted on a standard commercial chassis.

The upper boom is a two-section telescoping type consisting of a sealed telescoping insulated inner boom. All lift functions are microprocessor controlled for smooth, dependable operation and safety. The lower boom is a two-section telescopic type consisting of an inner and outer column and can articulate 87° from the horizontal.

Fitted with short jacking capability, the CTA-104 allows for the lift to operate over one side of the truck without requiring the operator to fully extend the outriggers on the opposite side.

The combination of our “out and down” style of outriggers and the electronic boom rotation system allows work to be performed over the kerb-side with no outrigger extension necessary on the street-side. The electronic boom rotation system will not allow the boom to rotate to the street-side.

These features combine for tremendous space-saving and a safe work environment for otherwise tight or crowded areas.

CTA - 104 - I

• Working Height 30.0m
• Height to bottom of bucket 28.0m
• Horizontal Outreach 15.65m
• Max. bucket capacity 360kg

• Sealed telescoping insulated upper boom. Rated for 500kV category A and C ANSI A92.2 requirements
• Two section telescoping lower boom with fibreglass insulating insert
• All lift functions microprocessor-controlled for smooth dependable operation
• Out and down outriggers with short jacking capability.
• Extremely low maintenance with non-lube bearings used at all pivot points.
• Bucket rotation through 180°
• Radio remote control is available
• Bucket capacity to 360 kg
• Material handler capacity to 900 kg

VEHICLE REQUIREMENTS:

The minimum vehicle GVM required for mounting the CTA-104-1 is 28,000kg.

For further details please phone 1300 654 591 or e-mail sales@aerialaccess.com.au